background image

are installing. 

8.

 

If the power to the chassis was turned 

OFF

 in step 1, 

turn the power to the chassis 

ON

Connecting External Cables 

Connect an Ethernet cable to the Ethernet Interface 
Connector on the Rear I/O module. 

100BASE-TX Ethernet Connector Pinouts 

NOTE

: Connectors for Trunks 1 to 4 (J1 to J4 or the BNC 

connectors on the Rear I/O module) are not functional in 
this board. 

Removing the Board 

Exercise caution when removing the board from a cPCI 
chassis. The board extractors are equipped with red locking 
tabs that lock when the board is correctly positioned in the 
chassis. 
 

CAUTION

 

When removing the board, if the red locking tabs on the 

extractors are not pressed while applying pressure to the 

extractors, there is a risk of breaking the tabs. 

To remove the board from the chassis, simultaneously press 
down both red locking tabs (see the figure below) on the 
extractors before applying pressure away from the center of 
the board to release the board from the chassis. 

 
 

P r e s s   a n d   h o l d   d o w

n

t h e   r e d   l o c k i n g   t a b s   o n

b o t h   b o a r d   e x t r a c t o r s

b e f o r e

  a p p l y i n g

p r e s s u r e   t o   t h e   b o a r d

e x t r a c t o r s

 

Removing the  

Rear I/O Module 

NOTE

: In a live insertion (powered-on) system, do not 

remove and replace a Rear I/O module while the main 
(front) board is in service. Remove the front board first, 
then remove and replace the Rear I/O module, and then 

reinsert the front board.  Remove the Rear I/O module using 
the red locking tabs as described above. 

 

 

After Installing the 

Hardware 

After installing the hardware, proceed with the software 
installation as described in the instructions included with 
the Dialogic

®

 System Software. 

For technical specifications and product information go to: 
http://www.dialogic.com/products.htm. 

Warranty and Return 

Information 

Warranty Period 

For specific warranty information for this board, refer to the 
Warranty section of the Products page, located at this URL: 
http://www.dialogic.com/warranties/.  

 

Contacting Technical Support 

Dialogic provides technical support for its products through 
a network of value added distributors who are trained to 
answer technical questions on installing and configuring 
Dialogic

®

 products.  If you are unsure how 

to contact your support channel, please call Dialogic 
in the United States at 973-967-6600 (9am-5pm EST) 
and we will assist in obtaining the appropriate support 
channel.  Outside the United States please refer to 

http://www.dialogic.com/support/contact

 to obtain 

local contact information. 

 

Dialogic also provides direct support via Dialogic

®

 Pro™ 

Services agreements.  For more details of direct support 
from Dialogic please refer to: 

http://www.dialogic.com/support/DialogicPro

Returning a Product 

To return a board for warranty repair or any other returns, 
please refer to:  http://www.dialogic.com/support/hwfaults 

Sales Assistance 

If you have a sales question, please contact your 
local Sales Representative or the Regional Sales Office 
for your area. Address, telephone and fax numbers, are 
available at the Dialogic website located at: 

http://www.dialogic.com/contact.htm

To purchase Dialogic

®

 products, please refer to the 

following website to locate the appropriate supplier.  

http://www.dialogic.com/purchase.htm

 

 

 

 

 

All contents of this document are furnished for informational use only and 
are subject to change without notice and do not represent a commitment on 
the part of Dialogic Corporation or its subsidiaries (“Dialogic”). Reasonable 
effort is made to ensure the accuracy of the information contained in the 
document. However, Dialogic does not warrant the accuracy of this 
information and cannot accept responsibility for errors, inaccuracies or 
omissions that may be contained in this document.  

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION 
WITH DIALOGIC

®

 PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, 

BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL 
PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS 
PROVIDED IN A SIGNED AGREEMENT BETWEEN YOU AND 
DIALOGIC, DIALOGIC ASSUMES NO LIABILITY WHATSOEVER, 
AND DIALOGIC DISCLAIMS ANY EXPRESS OR IMPLIED 
WARRANTY, RELATING TO SALE AND/OR USE OF DIALOGIC 
PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING 
TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, 
OR INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT OF 
A THIRD PARTY. 

P i n   1

Dialogic products are not intended for use in medical, life saving, life 
sustaining, critical control or safety systems, or in nuclear facility 
applications. 

It is possible that the use or implementation of any one of the concepts, 
applications, or ideas described in this document, in marketing collateral 
produced by or on web pages maintained by Dialogic may infringe one or 
more patents or other intellectual property rights owned by third parties. 
Dialogic does not provide any intellectual property licenses with the sale of 
Dialogic products other than a license to use such product in accordance with 
intellectual property owned or validly licensed by Dialogic and no such 
licenses are provided except pursuant to a signed agreement with Dialogic. 
More detailed information about such intellectual property is available from 
Dialogic’s legal department at 9800 Cavendish Blvd., 5

th

 Floor, Montreal, 

Quebec, Canada H4M 2V9. 

Dialogic encourages all users of its products 

to procure all necessary intellectual property licenses required to 
implement any concepts or applications and does not condone or 
encourage any intellectual property infringement and disclaims any 
responsibility related thereto. These intellectual property licenses may 
differ from country to country and it is the responsibility of those who 
develop the concepts or applications to be aware of and comply with 
different national license requirements.

  

Dialogic, Diva, Eicon, Eicon Networks, Eiconcard, Dialogic Pro and 
SIPcontrol, among others, are either registered trademarks or trademarks of 
Dialogic. Dialogic's trademarks may be used publicly only with permission 
from Dialogic. Such permission may only be granted by Dialogic’s legal 
department at 9800 Cavendish Blvd., 5th Floor, Montreal, Quebec, Canada 
H4M 2V9. Any authorized use of Dialogic's trademarks will be subject to 
full respect of the trademark guidelines published by Dialogic from time to 
time and any use of Dialogic’s trademarks requires proper 
acknowledgement.  The names of actual companies and products mentioned 
herein are the trademarks of their respective owners. 

 

L i n k

S t a t u s

I n d i c a t o r

( G r e e n )

P i n

1
2
3
4
5
6
7
8

L a b e l

R D +
R D -
T D +
N C
N C
T D -
N C
N C

Отзывы: