Dialogic 1000Series, Руководство пользователя

Страница: 48 / 326

48 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide
Parameter Reference
3.1.2 IP Settings, LAN2 (DMG2000)
The IP Settings, LAN2 group includes the following parameters:
• Client IP Address
• Client Subnet Mask
Note: Currently, LAN2 is only supported in Version 5.1 SU1 Software or later.
3.1.2.1 Client IP Address
Description: Sets the IP address of the Media Gateway second Ethernet port. This Ethernet port
may be used as the Maintenance port depending on the “IP Management Interface” setting. A value
of 0.0.0.0 disables the LAN2 Ethernet port.
Note: The LAN2 subnet must not overlap with the LAN1 subnet other wise there will be IP routing
issues.
Allowed Values: Any valid IP address in dotted decimal notation.
Default Value = 0.0.0.0 (disabled)
INI File Parameter Name = ipClientAddrLan2
Note: Unit requires a restart if this parameter value is changed.
3.1.2.2 Client Subnet Mask
Description: Sets the subnet mask of the Media Gateway Maintenance Ethernet port.
Allowed Values: Any valid IP mask.
Default Value = 255.255.255.0
INI File Parameter Name = ipSubnetMaskLan2
Note: Unit requires a restart if this parameter value is changed.