Dialog Semiconductor UM-B-065, Руководство пользователя

Страница: 20 / 24

UM-B-065
Bluetooth® Smart Communication Interface Board
User manual Revision 1.0 11-May-2016
CFR0012 20 of 24 © 2016 Dialog Semiconductor
Table 14: Wearable (224-30-B)
Reference design UART JTAG
Wearable
(224-30-B): 1. Connect the target board with the
IDC-10 cable ( Figure 8 ) to CIB.
2. Power supply:
a. The jumper on J16 header
must be in place.
b. The jumper on J14 header:
i. For VDD = 3 V must be
in place.
ii. For VDD = 1.8 V must
be removed.
c. In order to supply the target
board from CIB, turn the
power switch (
SW2 ) ON.
d. In order to supply the target
board from an external
power supply or battery, turn
the power switch (
SW2 )
OFF. The external voltage
supply depends on the
J14
setup.
3. Download the firmware.
4. When the software requests a
reset, please press the reset
button (
SW1 ) on the CIB.
1. Connect the target board with the IDC-10
cable ( Figure 8 ) to CIB.
2. Power supply:
a. The jumper on J16 header must be in
place.
b. The jumper on J14 header:
i. For VDD = 3 V must be in place.
ii. For VDD = 1.8 V must be
removed.
c. In order to supply the target board from
CIB, turn the power switch ( SW2 ) ON.
d. In order to supply the target board from
an external power supply or battery,
turn the power switch (
SW2 ) OFF. The
external voltage supply depends on the
J14 setup.
3. Download the firmware.