UM-B-047
DA1468x Getting Started with the Development Kit
User Manual
Version 7.0
23-Jul-2018
CFR0012
12 of 36
© 2018 Dialog Semiconductor
Figure 9: Chip version in RealTerm in Windows
6.4.2
Linux Host
Under Linux there is a simpler approach to validate the connection using a basic terminal such as
putty. Connect putty to /dev/ttyUSB0 at 57600 baud and press
K2
Reset. There should be an output
as shown in
which contains ASCII characters with the device name as well as non-ASCII
characters. This is enough to validate the connection to UART1.
Figure 10: Chip version in PuTTY in Linux
6.5
Troubleshooting
If there any problems with the ProDK connection to PC some possible solutions might be:
●
Make sure that the Host PC is connected to Internet
