DiaLFonZo-Copter V-Tail Hunter 400, Инструкция по сборке

Страница: 3 / 8

DiaLFonZo V-Tail
Please follow the visual instructions carefully to make sure no mistakes are made.
ASSEMBLY of the Landing Legs (Build three of these)
The Landing legs are all identical and will be built the same way.
They are made up of four main G10 parts and associated hardware.
Note: You will be required to use four
5/16" 4-40 hex screws
and four
4-40 nylon lock nuts
for
each of the three assemblies.
ASSEMBLY of the Two Front Arms (Build two of these)
The Two Front Arms are all identical and will be built the same way.
They are made up of two main G10 parts and associated hardware.
+ One Pre made landing legs from the previous step.
Note:
As the
0.5" standoff
in the landing leg is designed to pull the two landing tips closer
together, you may want to remove the
1/4" 4-40 hex screws
from the
0.5" standoffs
to make
installation into the frame much easier.