13
MAINTENANCE AND CLEANING
Shut down the switch of the machine, unplug power line and push the fasteners on both sides of the dust box to
take out the dust box. After taking off the filter device, you can pour out the litter or wash with clean water.
Take out the dust box.
Wash with clean water
Ventilate and dry
Daily Cleaning
Any daily cleaning or maintenance work must be performed after shutting down the vacuum cleaner.
To ensure the cleaning effect or extend the life cycle of electric motor, please timely clean dust box, filter cartridge;
if dust box and filter cartridge are broken, please timely make a change.
The penetration force of the equipped UV-C ultraviolet tube is comparatively weaker, please prevent the ultraviolet
tube from contaminating by dust, oil stain and others.
The surface of the vacuum cleaner cannot be cleaned by water, edible oil or other liquids to avoid any damage or
unexpected accidents; dry cloth or wet wipes can be used for cleaning, but water should be avoided to enter the
inside part of the machine.
TROUBLE SHOOTING
FAILURE
POSSIBLE CAUSES
SOLUTION
The vacuum
cleaner is
completely not
working
The plug is not connected fixedly to the socket. Reinsert the plug
The power socket is of no electricity
Check the circuit breaker
The switch of vacuum cleaner is closed
Toggle the switch of the machine
Suctionforcei
sweaker
The air inlet is blocked
Limpe a obstrução
Dust box is full
Limpe o lixo atempadamente
Dust on the HEPA filter surface is too many
Clean the obstruction
