manualshive.com logo in svg

Di-soric ID-05, Руководство пользователя, Страница: 3 / 380

Поделиться
Скачать
Di-soric ID-05 Скачать руководство пользователя страница 3

ID-05 High Performance Imager User’s Manual

iii

Introduction

Copyright ©2010

ISO 9001 Certified

Issued by TüV USA
All rights reserved. The information contained herein is proprietary and is provided solely for the purpose 
of allowing customers to operate and/or service di-soric manufactured equipment and is not to be 
released, reproduced, or used for any other purpose without written permission of di-soric.
Throughout this manual, trademarked names might be used. Rather than place a trademark (™) symbol 
at every occurrence of a trademarked name, we state herein that we are using the names only in an editorial 
fashion, and to the benefit of the trademark owner, with no intention of infringement.

Disclaimer

The information and specifications described in this manual are subject to change without notice.

Latest Manual Version

For the latest version of this manual, see the Download Center on our web site at: 

www.di-soric.com

.

Technical Support

For technical support, e-mail: 

[email protected]

.

Warranty and Terms of Sale

For Standard Warranty information contact: 

di-soric 

GmbH & Co. KG

Steinbeisstraße 6

DE-73660 Urbach
Fon: +49 (0) 71 81 / 98 79 - 0
Fax: +49 (0) 71 81 / 98 79 - 179
[email protected]
www.di-soric.com

Содержание ID-05





























































































































































































































































































































































































Отзывы:

Нет отзывов