Di-LOG PU690, Инструкция по эксплуатации, Страница: 8 / 12

PU690 Operating Manual
Di-LOG
...measurably better
1. Operating Instructions
Proof Testing
Insert the voltage tester probes into the
output sockets (690V AC). Apply sufficient
pressure to ensure a good connection.
Check the voltage indication on the voltage
tester under test. Ensure the output voltage
LED is on during the test. Once visual
indication has been confirmed and
verified, remove the right test probe first
before removing the left test probe.
7
Please note the output voltage
may not be 690V and will depend
upon the load applied by the voltage
indicator.
V. Display and Controls
unit
Proving
PU690
690V AC
Output Voltage
On LED
Voltage Output
Points
Low Battery
Indicator