Dhollandia DH-P1, Руководство по эксплуатации, Страница: 36 / 48

35
DHOLLANDIA
8.5 OPERATION INSTRUCTIONS FOR THE DH-PH1* / P1* LIFTS
WARNING

Prior to operating the lift, ALWAYS take note of the safety features, door system, door interlocks etc. installed by the
manufacturer of the vehicle and the operation instructions issued by him. These might have a significant influence on the safety
of the operator and any persons lifted or lowered with the platform.

Negligence can put the operator and other parties at great risk of serious bodily injury and death.

The instructions below are made up for the DH-PH1* / P1* lift with the optional pivoting lift frame. For the basic version with
fixed lift frame, the first 5 steps do not apply. Start from the 6
th
instruction onwards.
Deployment of the platform
Consult the operation manual before
getting started. Follow ALL safety and
operation instructions.
Switch ON the electrical power to the lift
by means of the cabin switch and / or the
main battery disconnect switch on the
power pack.
Press STOW. Check if the hydraulic
system is building up pressure and the
platform is pressing hard against the lift
arms.
If the platform is stowed against the side
of the vehicle body, push down the pivot
lock to pivot the lift frame towards the
door aperture.
Manually pivot the lift frame from its
travel position against the side of the
vehicle body over 90° towards its work
position in the door aperture.
On lifts with automatic platform locks (ref.
OWF014.1), check if the platform lock is
disengaged.
On lifts with a manual platform lock (ref.
OWF015), manually release the platform
lock.
See also section 8.3 on page 30.