2
SAFETY NOTES
The following basic instructions must be observed at all times:
1. The device must not be commissioned until the manual has been read and understood.
2. The power supply to produce the supply voltage must have a safe electrical isolation by means of double
insulation and a safety transformer.
3. The device must not be used outside of its specification without suitable protective measures.
4. Modifying the device is not permitted.
5. Do not remove the warnings or rating plates.
6. Do not exceed loads of 250kg.
Installation and commissioning of all devices must be performed only by personnel specially trained for that purpose.
Protection of operating personnel and the system is not ensured if the product is not used in accordance with its
intended use.
The laws and guidelines applicable for the use or the intended purpose must be observed. Devices are approved only
for proper usage in accordance with intended use. Ignoring these instructions will void any warranty and absolve the
manufacturer from any liability.
Use only recommended original accessories.
If you are unable to resolve faults, switch the device off. Make sure that the device cannot be switched back
on accidentally. If the device needs to be repaired or replaced, return it to Effidence. If you open or modify the
device yourself, not only are you endangering yourself and others but you will void any warranty and absolve the
manufacturer from any liability.
Dispose of unusable devices in accordance with the applicable national statutory regulations.
For instance, you can take the sensor to a designated collection point for electronic waste.
SAFETY SYMBOLS:
DO NOT USE EFFIBOT IN EXTREME WEATHER CONDITIONS AND STORE
WITHIN TEMPERATE CONDITIONS.
Содержание Formula-e EFFIBOT
Страница 1: ...EFFIBOT GUIDEBOOK...
