DHK Hobby OPTIMUS 8383, Руководство пользователя, Страница: 14 / 18

Parts Diagrams
LCD Functions and Operations
Key Operations
Menu keys:
Press Left key (<) to main command, and Right key (>) for secondary
command.
DATA keys:
Press Left key (+) or Right key (-) to adjust, set up and auto save the
current chosen function.
Display Interface
Switch on the transmitter, you will hear “beep” sound (beeps once), and
the LCD display mode will read the default parameters pre-set at the
factory and BATT status mode (main menu).
BATT: battery status, function reset settings
Battery level display. Battery voltage appears on LCD display. When the voltage is 4.4V, the
value flashes and you can hear warning sound. This means the battery voltage is deficient.
When battery voltage value shows 4.0V, the value blinks fast and warning sound keeps strong.
This indicates battery voltage is too low and batteries cannot be used. Please turn off the
transmitter and replace batteries. If rechargeable Ni-Mh or Ni-Cd batteries are used, please
charge the batteries with proper charger.
Function reposition. In case the parameters are messed up or if you don't know how to set
up, please turn off the power, press and hold MENU Left key (<). Then turn on the power and
you will hear “beep” sound after two seconds. Release all keys and all parameters will go back
to factory default values.
Frequency duplication setting. When two transmitters are used at the same time, a
frequency might be duplicated. In this case, you may choose the auto frequency function. First
turn off the power, then press and hold MENU Right key (<), and turn on the power. The display
will show hopping data. Release the key and the hopping data will stop. The digit shown on the
display is your frequency. Bind the transmitter with the receiver through binding keys.