DHK Hobby HUNTER 8135, Руководство пользователя

Страница: 4 / 28

Over voltage protection: Yes
Compatible with 550 motor: 10T-23T (Preferably with 15T motor)
Dimension: 34*34*15.2mm
Operations
1>Plug in battery wire, Red pin is positive pole, Black pin is negative pole. Connecting to standard DC
plug is also fine.
2>Switch on the power, there comes alarming sound if no signal is sent. The alarming sound stops when
signal is sent out.
3>Switch on the transmitter. Move the trim to neutral point at which location red or green LED stops
flashing. Push the throttle trigger, green LED is on, the model goes forward. Pull the trigger back after
neutral point brings you to brake status. The more you pull the trigger backward, the greater the brake is
being commended. Release the trigger to neutral point, and pull it back to brake the model. At this time,
the red LED is on.
Warning
Avoid water. Avoid reverse connection.
Special features
The low voltage protection stops the unit when the average voltage reaches 5V, this greatly avoids battery
damage. This also helps to reduce negative impact to nearby electronic devices. As compact a device as
this ESC is, it provides powerful energy, but with as low resistance as 0.0013Ω. The emulated brake
technology greatly improves the stableness, it also effectively reduces the sparks produced by the brush
and motor turns to prolong the brush life span.
Hunter may come with a 7-cell NiMh battery (Version B) to improve its performance and speed.
Version B (7-cell NiMh battery)
For this version, the battery that comes with Hunter is a 7-cell 8.4V SC type NiMh battery. The battery is
with T-connector, so does the battery charger. Besides, the ESC also has a T-connector to match it on the
battery.
Below you may read the features and specifications of the high voltage ESC for your Hunter.
High Voltage ESC (Part# H126)
Features
1. Auto search throttle neutral point.
2. HF drive system
3. Over-heat protection (90C°)
4. Lipo battery low-voltage protection (2S Lipo-6.6V cutoff, 3S Lipo-9.9V shut down)
5. Low internal resistance & big capacity PCB board, providing great resistance to high current.
6. Forward, brake and reverse functions, good for both vehicles and boats.
Specifications
Forward current: 380A
Reverse current: 190A
Brake current: 250A
Voltage range: 4.8V-12.6V
PWM frequency: 1.5KHz
BEC voltage: 5V/2A
Operation
To obtain forward, brake and reverse functions and to switch battery types, kindly refer to the following
3