DHE SYSTEMS STAL1000, Руководство пользователя

Страница: 37 / 37

7- QUICK GUIDE FOR USER MODE COMMANDS FOR THE STAL1000 RECEIVER
Soft version: 1.20
PRESS “E” TO ENTER IN “USER MODE”
1: User mode
Sequence: E+1+_
1: Transmitter enabled/disabled
2: Frequency setting. User key protected. Default key
1234
To exit without to change it press “E ”
3: Memory frequencies access. User key protected. Default key 1234
To exit without to access to memories press “E ”
4: Input attenuator & modulation level. Change pressing “
↑↑↑↑
” “
↓↓↓↓
” keys
To exit without to change it press “E ”
5: Output power. Change pressing “
↑↑↑↑
” “
↓↓↓↓
” keys
To exit without to change it press “E ”
0: “User Mode” help
Press
“E” to return to “User Mode” .
To exit to the welcome message, press “E” again.
2: Multifunction Meter
Sequence: E+2+_
1: Forward % reflected output power
2: Modulation level
3: Main power supply voltage
0: Multifunction Meter” help
Press
“E” to return to “User Mode” .
To exit to the welcome message, press “E” again.
3: Inicial Settings
Sequence: E+3+_
1: Operation mode
1: Mpx, 2: Mono
2: Deenphasis
1: 0 us, 2: 50 us, 3: 75 us
3: User Key. Current key required to change it
4: Display language
1: Spanish, 2: English
0: “Initial Settings” help
Press
“E” to return to “User Mode” .
To exit to the welcome message, press “E” again.
4: Equipment Information
Sequence: E+4+_
1: Frequency range
2: Current frequency
3: Frecuencies stored in memory
6: Maximum available output power
7: Serial number & software version
0: “Equipment information” help
Press
“E” to return to “User Mode” .
To exit to the welcome message, press “E” again.
0: User Mode help
Sequence: E+0
Press “E” to return to “User Mode” .
To exit to the welcome message, press “E” again.
SECTION 9/24