Version 1.3.0 - 07.11.2011
8
Assembling and Wiring the Hardware
Specifications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part
of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights.
5.3
Installation Information for Console Frames
The Console Frames 52-28xx allow an angled installation of the control modules.
Console Frames 52-28xx
The control modules are magnetically fixed in the installation frame. The 52-3018A Console mounting kit is required for
mounting the TFT/Touch Display on the Console Frame .
Weblink
For detailed dimensions of each type of console frames, see 52/SX list of
modules - 52/SX Console Frames.
For detailed assembly instruction of the Console mounting kit, see Assembly
instruction of 52-3018 on 52/SX frames.
5.4
System Wiring
The 52/SX mixing system consists of 3 main parts, which are connected via an industry standard CAT5 or CAT6 shielded
network cable. These parts are:
·
XS Core: This unit includes the DSP Audio Engine and the Control Engine.
·
XS Multi-I/O box: This unit includes all input and output connectors for analog and digital audio, USB and GPIO.
·
Control modules: These are the user interface of the mixer with all faders, control knobs, push buttons, OLED
displays and TFT displays.
General Information
Please use at least shielded CAT5 cables continuous for wiring. But DHD recommends to use shielded CAT6 cables for
longer distances. The maximum length of the Ethernet cable between two modules is 100 meters (e.g., between the XS
Core and Control module or between the XS Core and XS Multi-I/O Boxes).