DHD Power Cruiser 52/XR Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 60

background image

Version 1.14.0 - 14.04.2010

41

Further Information

Specifications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part
of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights.

5. The LED indicates, that routing kernel no. 1 is locked to the inputs of the upper MADI port.

6. If a redundant kernel is installed, this LED indicates, that routing kernel no. 2 is locked to the inputs of the upper MADI

port.

7. LED 7 indicates, that routing kernel no. 1 is sending data to the outputs of the lower MADI port. This LED is blinking if

the first kernel starts malfunctioning. That means, the first kernel should send data to the outputs of the lower MADI
port, but it does not. If a second, redundant routing kernel is available, LED 8 indicates, that the second routing kernel
is operating now.

8. Normally, the first kernel should send data to the outputs of the lower MADI port. If the first kernel is malfunctioning,

LED 8 indicates, that routing kernel no. 2 is sending data to the outputs of the lower MADI port.

9. The LED indicates, that routing kernel no. 1 is locked to the inputs of the lower MADI port.

10. If a redundant kernel is installed, this LED indicates, that routing kernel no. 2 is locked to the inputs of the lower MADI

port.

8.3.3

52-6129A - XR Dual MADI Module, multi/single

Meaning of the LEDs of the 52-6129 Module.

1. This LED is permanently on if the module is powered.

2. Indicates, that the module is running. This LED blinks. Seen from left to right over the entire system, these LEDs should

blink as a moving light.

«
...
42
43
44
45
46
...
»

Содержание 52/XR





























































Отзывы:

Нет отзывов

Похожие инструкции для 52/XR

All in One Printer

Бренд: Baracoda Страницы: 42

Бренд: Watchguard Страницы: 39

Бренд: H3C Страницы: 21

Бренд: Edgewater Networks Страницы: 7

Бренд: Macsense Страницы: 13

Бренд: AIC Страницы: 88

CyberSWITCH CSX101

Бренд: Cabletron Systems Страницы: 72

Бренд: B+B SmartWorx Страницы: 50

Бренд: Cradlepoint Страницы: 2

Бренд: NetComm Wireless Страницы: 154

Бренд: Netstor Страницы: 17

EdgeSafe M40G1AC

Бренд: Garland Страницы: 159

Бренд: UltrArmor Страницы: 3

Бренд: UfiSpace Страницы: 34

Бренд: ubiquoss Страницы: 46

Бренд: NAVI Страницы: 18

Бренд: Epson Страницы: 8

Бренд: Epson Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды