Enabling Independence through Technology
Optional - Safety Sensors
These are fitted to both sides of
the door (if required). These
sensors stop the door from
operating if anyone or anything
is positioned in front or behind
the door when it is moving. It is
important that they are kept
clean and not covered up
otherwise the operator will no
longer work.
NB: If you are having any difficulty in operating the door firstly, please check (if fitted) that
there is no object which may be interfering with the range of the safety sensors.
Secondly, switch the door operator into the ‘OFF’ position, leave for 1
minute, and then switch
to the ‘ON’ position
Thirdly, ensure that the batteries in the key fob do not require replacing
If problems persist, please contact us using the details at the end of these instructions
Electronic Multipoint Lock Operation
If you have an electric multipoint lock system installed this
will be operated automatically by the door operator
(providing it has not been manually locked using the key).
If you need to manually open the door from the inside,
push the handle down and pull/push the door open.
To manually open the door from the outside you will need
the key for the door. Turn the key ¼ of a turn in the
direction required to unlock the door, (you will notice that
the key will go slightly stiff to turn) turn the key another ¼ turn in the same direction to
release the lock system. You can now pull/push the door open.
When the door closes it will automatically lock!
