ASSEMBLY INSTRUCTIONS
PARTS AND HARDWARE
2-4
3-4
Avoid using sharp objects such as a knife to cut open packing as you may
accidentally damage the upholstery.
Do not fully tighten bolts until assembly is complete.
Open the velcro closure on the Backrest (E). Attach the Right Rear Leg (D) and
Left Rear Leg (C) to the Backrest (E) using Bolt (G), Washer (H) and Lock Washer (I).
Tighten using provided Allen Key (J). Close velcro closure after tightening the bolts.
Open the bottom velcro dust cover located on the bottom of the Seat Deck (F).
Attach the Left Front Leg (A) and Right Front Leg (B) to Seat Deck (F)
using Bolts (G), Washers (H) and Lock Washer (I). Tighten using provided Allen Key (J).
NOTE: Make sure metal insert nuts are facing pre-drilled holes in leg support.
2
A. Left Front Leg
1x
E. Backrest
1x
J. Allen Key
1x
H. Washer
12x
I. Lock Washer
12x
B. Right Front Leg
1x
C. Left Rear Leg
1x
F. Seat Deck
1x
D. Right Rear Leg
1x
E
C
D
H
I
G
J
H
I
G
J
A
B
F
G. 5/16x60mm Bolt
12x
