DH Wireless Solutions PDN LITE S2 Скачать руководство пользователя страница 9

9

877.524.0430

PDN LITE

S2

 Field Manual

7 .  Once you have established effective Internet access, log off the network and push 

the unit’s Standby Button, the LED light will turn off, indicating gateway services 
have been turned off . Avoid leaving the gateway on when not in use, as it will 
continue to draw power from the batteries if left on .

8 .  Locate AC charging cord, lift the weather cover on the recessed AC receptacle, 

and plug in the unit . At this time observe the current charge level shown on the 
Battery Gauge LEDs . If 30 days have passed since the last charge, it will likely 
show low charge . Allow the battery to charge until Battery Gauge indicates  
full-charge status .

9 .  Return to storage, leaving Main Power Switch in the “ON” position while  

plugged into available live AC power source .

Record your maintenance data in the Maintenance Log on pages 16-19.

Note: All pass-through ports, caps, seals and gaskets should be inspected periodically to 
ensure a tight fit.

 Contact DHWS for information regarding PDN remote updates or other 

maintenance needs . If you are experiencing ongoing issues with your PDN or would like to 
order parts, contact DHWS at 877 .524 .0430, option 3 . For online support ticketing or incident 
reporting, visit www .portablessupport .com .

TROUBLESHOOTING 

1 .  If unit fails to power up, check to ensure Main Power Switch is in the on position . 

Then check the Battery Gauge to ensure batteries are sufficiently charged . Unit 

can run at the same time it is being charged by AC power source .

2 .  If batteries need to be charged, connect supplied AC Power Cord to unit’s AC 

Charging Port and then plug into a live 110-120V AC power source . Main Power 

Switch must be “ON” and Battery Gauge will scale to indicate PDN is charging .

3 .  If WiFi does not appear on your device, ensure cellular gateway is active by 

checking status lights .

4 .  Should a power related issue persist, or to learn more about your on-board 

SmartSource (S

2

), visit www .portablessupport .com .

Содержание PDN LITE S2





















Отзывы: