DH Instruments MOLBOX OHMIC, Инструкция

Страница: 2 / 2

CABLE USE FOR MOLBOX OHMIC SYSTEM CALIBRATION
When using the cable to apply a known resistance value to the molbox, the included gender changer will be required.
Connect the gender changer to the molbox channel to be calibrated. Connect the cable to the gender changer. The
bannana plugs are used to connect to the decade boxes as shown in Figure 2.
Figure 2 Cable Use with Decade Boxes
The following parts are included in the shipment:
DESCRIPTION QTY PART NO.
Cable, molbox ohmic calibration 1 402149
Gender changer, 15-pin M-M 1 103587
Instruction sheet 1 560071
molbloc, molbloc-S, molbox, molstic and molstic-s are trademarks, registered and otherwise, of DH Instruments, Inc.
VCR is a registered trademark of the Swagelok Company.
Document 560071 040924
DH Instruments, Inc. Tel 602.431.9100
4765 East Beautiful Lane
Phoenix AZ 85044-5318
USA
Fax 602.431.9559
dhi@dhinstruments.com
www.dhinstruments.com