DGTEC iWOOD 7, Руководство пользователя

Страница: 6 / 21

1
REMOTE CONTROL SETUP
Battery Installation
1.Release the side latch and pull out the battery holder
2.Install only a 3 volts Cr2025 battery cell and place battery
po respectively to the + sign of the holder.
3.Replace the battery holder.
Notes:
1.Use only the size and type of battery specified.
2.Be sure to follow the correct polarity when installing the battery as indicated
in the battery compartment. A reversed battery may cause damage to the
device.
3.Do not drop or step on the remote control, this may cause inner damage
to the device.
4.If not using the remote control for a long period of time, remove the
battery to avoid possible damage due to battery leakage.
Remote control effective range:
Aim the remote control at the unit IR receiver. The distance to the unit should
。
be less than 5 meters and within 30
.
The remote control may be less effective if
:
1
.
Unit is placed under intense ambient
lighting
.
2
.
There are obstacles between the remote
control and IR receiver
.
3
.
Other remote controls are operated at
the same time
.
4
.
Low battery power
.
ENTER
MENU
VOL-
VOL+
MEM
CH+
iPod
TUNER
AUX
BASS +
BASS -
TREBLE-
CH-
SLEEP
ATT/MUTE
DISP MODE
ALARM.S