DGStation relook 300S, Руководство по эксплуатации

Страница: 49 / 113

Connection
In case the 2 tuners are connected, select separated .
If the Tuner is connected by Loop through, select Loop Thru .
Switch Type
Select your LNB switch type.
Number of LNBs
Select the number of LNBs you have installed.
LNB set up
Move the cursor to each LNB No. for which you want to set up and press OK button on the RCU.
In the pop up menu, select LNB Type, Local Frequency, DiSEqC port No., Satellite Name and
TP Frequency.
(If you cannot find suitable Satellite Name or Frequency, you can register new satellite names or
frequencies at the bottommost position of pull-down list.)
Once your setup is completed, press EXIT button to save and exit.
The Signal Indicator
It displays Signal Strength and Signal Quality that you receive a signal.
Make sure that LNB Setting is correct by this indication.
Go to Search
Once LNB setting is completed, select Go to Search to move to Channel Search menu.
■ Channel Search
You can select one of three Channel Search options such as Auto, Manual and Advanced
Searches channels automatically using the information the relook 300S has.
Satellite Name : Select each satellite name or All.
Network Search : Select Network Search ON/OFF
Search Method : Select ALL, FTA, or Scrambled .
All : It detects and searches both FTA and Scrambled channels.
FTA : It detects and searches only the Free-To-Air channels.
Scrambled : It detects and searches only the Scrambled channels.
48