Installation
Installation Environment
WARNING
Never install outside or in any location where exposure to water or high humidi-
ty may occur.
Current leakage may cause electrical shock or fire.
WARNING
Never install the machine close to any flammable object or in a gas-filled
location.
Combustion or explosion may occur.
WARNING
Position the machine so that the power-cord plug is within immediate reach at
all times.
This is to enable quick disconnection of the power-cord plug in the event of an
emergency. Install the machine next to a power outlet. Also, provide enough
empty space to allow immediate access to the power outlet.
CAUTION
Install the machine in a location that is level, stable, and able to bear the weight
of the machine.
The total weight of the machine may reach 46 kg (101 lb.) or more. Installation in
an unsuitable location may cause a major accident, including tip over, fall, or
collapse.
• Never install in a location subject to wide fluctuations in temperature or humidity.
• Never install in a location subject to shaking or vibration.
• Never install in a location where the floor is tilted, not level, or unstable.
• Never install in a dusty or dirty location, or out of doors.
• Never install in a location exposed to direct sunlight or near air-conditioning or heating equipment.
• Never install in a location exposed to considerable electrical or magnetic noise or to other forms of
electromagnetic energy.
• Never install in an environment where silicone substances (oil, grease, spray, etc.) are present. Doing
so may cause poor switch contact.
Placement and Installation
CAUTION
When lifting the machine, hold the locations shown in the figure.
CAUTION
Unpacking and installation must be carried out by two or more people.
Failure to observe this instruction may cause the machine to fall over, resulting in
injury.
22
