DGSHAPE DWX-4, Руководство пользователя

Страница: 35 / 53

Periodic Maintenance
35
Chapter 3 Maintenance
Cleaning the Inside and Applying Grease
Cases Where You Need to Perform this Task

When abnormal noise occurs when the machine is running

Approximately once every 500 hours
Required Items
·Grease (Use the grease included with product) ·Grease application stick
WARNING
Before starting maintenance, turn off the machine's power switch and unplug the
power cord from the machine.
Attempting such operations while the machine is connected to a power source may
result in injury or electrical shock.
CAUTION
Be sure to follow the replacement procedure provided in this manual. You must
not touch any parts except for those specified in the instructions.
An unexpected operation of the machine may cause injury and burn.
CAUTION
Secure the maintenance cover with the screw when opening the cover.
Neglecting to do so may cause the maintenance cover to fall down and your fingers
to get caught in the space between the cover and the machine.
1.
Open the maintenance cover.

Open the front cover, and remove cutting waste
remaining inside.
If cutting waste remain, they may spatter around when you
open the maintenance cover.

In the top window of VPanel, select the ma -
chine that you wish to perform maintenance.
Click [Settings].

Click [Maintenance] tab.
Click [Front or rear].
To maintain the Y-axis, move the rotary axis unit backward
before opening the maintenance cover.