DGSHAPE DWX-4, Руководство пользователя

Страница: 26 / 53

26
Chapter 3 Maintenance
Precautions about Maintenance
Important Notes on Care and Maintenance
WARNING
Never use a pneumatic blower.
This machine is not compatible with a pneumatic blower. Cutting waste may get
inside the machine and cause fire or electrical shock.
WARNING
Never use a solvent such as gasoline, alcohol, or thinner to perform cleaning.
Doing so may cause fire.
WARNING
Never use a vacuum cleaner to take up cutting waste.
Taking up fine cuttings using an ordinary vacuum cleaner may cause danger of fire
or explosion.
WARNING
Caution: high temperatures.
The cutting tool and spindle motor become hot. Exercise caution to avoid fire or
burns.
CAUTION
When performing maintenance, be sure to keep the tool detached.
Contact with the blade may cause injury.

This machine is a precision device. Carry out daily care and maintenance.

Carefully clean away cutting waste. Operating the machine with a large amount of cutting waste present may cause
malfunction.

Never apply silicone substances (oil, grease, spray, etc.) to the machine. Doing so may cause poor switch contact or a
cause of failure of an ionizer.

Do not lubricate any place except for the lubrication locations shown in this document.