DGSHAPE DWX-4, Руководство пользователя

Страница: 23 / 53

Starting Cutting
23
Chapter 2 Cutting
STEP3 : Outputting Cutting Data
* You can also use commercial CAM software to output cutting data. For information on compatible CAM software, contact
the dealer where you purchased the milling machine.
Procedure

In the top window of VPanel, select the machine
that you wish to output.
Click [Output file].
The "OUTPUT" window is displayed.

Click [Add].
The "Open" window is displayed.

Select cutting data and click [Open].
The selected cutting data is displayed in the data list of the "OUT-
PUT" window.
Repeat the procedures

and

to output the cutting data
continuously.

Click [Output].
Changing the order in the data list
You can change the output order by selecting the cutting data and click or in the data list. (The cutting
data is output from the top of the data list.)
Deleting cutting data in the data list
You can delete the cutting data by selecting the cutting data in the data list and click [Remove].
Adding cutting data by drag & drop
You can add cutting data by drag & drop data on the window displayed in the procedures

and

.