dg_nvmeg4ip_instruction_xilinx_en.doc
20-Apr-20
Page 7
3 Test Menu
3.1 Identify Command
Select ‘0’ to send Identify command to NVMe SSD.
Figure 3-1 Test result when running Identify command
After finishing the operation, the SSD information output from Identify command is displayed.
The console shows three values.
1) SSD model number: This value is decoded from Identify controller data.
2) SSD capacity: This value is signal output from NVMeG4 IP.
3) Data size per LBA: This value is signal output from NVMeG4 IP. Two values are
supported, i.e. 512 byte and 4 Kbyte.
