STEP 4
ASSEMBLE WOOD SLAT TO END SLAT HOLDER AND CENTER SLAT HOLDER: NOTE,
WHEN ATTACHING PART G AND H TO PART 12 ENSURE THE PRONGS ON PART G AND
H ARE POINTING TOWARDS THE GROUND. ATTACH PART G TO ANY END OF PART 12,
THEN ATTACH PART H TO THE OTHER END OF PART 12 FOLLOWED BY ATTACHING ANY
END OF ANOTHER PART 12 TO THE REMAINING END OF PART H, THEN ATTACH PART
G TO THE OPEN END OF PART 12. THIS WILL ASSEMBLE ONE COMPLETE SLAT, SEE
DIAGRAM. REPEAT THIS STEP UNTIL A TOTAL OF 12 COMPLETE SLATS IS ASSEMBLED.
INSTALL EACH OF THE COMPLETED SLATS TO THE SIDE RAIL AND CENTER SLAT
SUPPORT: INSTALL ONE COMPLETED SLAT BY INSERTING THE PRONGS FROM PART G
INTO THE HOLES ON THE SIDE RAIL (PART 6), THEN INSERT THE PRONGS FROM PART H
INTO THE HOLES IN THE CENTER SLAT SUPPORT (PART 10) FOLLOWED BY INSERTING
THE PRONG OF PART G FROM THE REMAINING END OF THE COMPLETED SLAT INTO
THE SIDE RAIL (PART 6). REPEAT THIS UNTIL ALL COMPLETED SLATS ARE INSTALLED.