DFSK K 2019 Series, Руководство по обслуживанию

Страница: 124 / 124

Vehicle Protection
104
with sponge or soft cloth which
dipped into neutral detergent or wash
soap for petrol gently.
④
Once after the dirt is removed
completely, wash the detergent with
the running water.
⑤
After washing, clean the car
body gently with the wet cloth, and
dry it in the shady and cool place by
air.
⑥
Check the spray paint surface
to see if there are damages needing to
be repaired.
2.
Cleanup & Wax of the
Vehicle’s Outer Part
a.
Clear up all damaged part and
dry.
b.
Mix the paint round, and
repaired the damaged place gently
with the small brush.
c.
Dry it up after painting.
Waxing
You are advised to make the
vehicle waxed & polished after
washing to make its cover paint
protected and brighter.
①
Only wax and polishing
compound with high quality can be
used.
②
While using wax and polishing
compound, please pay attention to
following proceedings that the manufacturer
stipulates.
③
The chromed parts shall be
waxed too.
2.
Cleanup & Wax of the
Vehicle’s Outer Part
a.
The damage of the auto’s surface
and the comeoff of the paint layer
should be repaired immediately, do
not make metal exposed to the air for
a long time.
b.
The moisture content, dust,
silt under the mat of the auto room can
accelerate the corrosion of the vehicle.
So, please keep the vehicle clean.
c.
When loading and unload
some goods like corrosivity material
articles, such as chemical article,
fertilizer, cleaning the article , alkali ,
sour , salt ,etc., which should be
packed in the special container to
transport , if there are leaking or
overflowing,
please clean up
immediately.
d.
Don't park your automobile in
the car moistly, poor ventilation place,
and don't wash the automobile in the
garage.
e. Don’
t spread the primer and
preventive oil paint layer on or around
the exhaust system so as not to cause
the fire.
Copywright Reserved
After washing, please check
whether there are water entering
the brake or not. If yes, please
stepped on the brake repeatedly
and slowly to dehumidify it
during driving a vehicle at a
low speed.
。
While using the cleaning agent, the
following precautions of manufacturer's
regulation should be paid attention to.
Don't use strong house using detergent
or soap.
Please do not wash the
plastic parts by steam and
water whose temperature is
above 82
℃
.