IV-18(
ИВ
-18)VFD Tube Clock Instructions Http://www.nixieclock.org
Press
OK
to save the settings and exit the menu 6, or you can cancel it.
■
This setting stored in the clock and can’t lose when power off.
■
The display mode only effective for displaying time, when you set the time, the
leader 0 will always display.
Menu 7: Set Buzzer mode
Press
FUNC
key to enter menu, use
RIGHT/LEFT
key to change the number, then enter the
menu 7 Set buzzer mode.
Press
OK
to enter settings screen, at this time it will display the present buzzer settings. Use
RIGHT/LEFT
key to switch.
Displaying
ON
: operate to the clock, buzzer will have beep sound.
Displaying
OFF
: operate to the clock, buzzer will sound off.
Press
OK
to save the settings and exit the menu, also you can cancel it.
■
This setting stored in the clock and can’t lose when power off.
■
Even if the buzzer mode is OFF, the Alarm will always ringing.
Menu 8: Date interval of scrolling display
Press
FUNC
key to enter the menu, use
RIGHT/LEFT
key to change the number, and then
enter in menu 8 date interval of scrolling display.
Press
OK
to enter the settings screen, at this time it will display the present date interval of
scrolling display. Press digital number can set the time interval as 00-99 seconds.
Displaying 00 SEC, it means no alternate display for date.
Press
OK
to save the settings and exit the menu 8, and you also can cancel it.
■
This setting stored in the clock and can’t lose when power off.
■
If the time interval was beyond 0, the clock will displayed date for 3 seconds per N
seconds.
Menu 9: Temp interval of scrolling display
Press
FUNC
key to enter the menu, use
RIGHT/LEFT
key to change the numbers, and then
enter in menu 9 Temp interval of scrolling display.
Press
OK
to enter in settings screen, at this time it will display the temp interval settings.
Press digital number can set the temp interval as 00-99 seconds.
Displaying 00 SEC, it means no alternate display for temp.
Press
OK
to save the settings and exit the menu 9, and you also can cancel it.
■
This setting stored in the clock and can’t lose when power off.
