Once the legs are attached to the servo put the supplied rubber caps on the end of the wire legs.
These rubber caps will prevent the legs slipping and may also protect your furniture from scratches.
You may put the rubber feet in either
way on the legs. In this detail picture
we put them in the opposite direction
than in the other pictures. Choose
whatever you find more functional or
better looking.
5. Attaching the battery holders
Before you attach the battery holders to the main robot body you will need to solder their power
wires in series connection together. Connect the red wire of one battery holder with the black wire
of the other battery holder. Refer to the following picture to make sure you connect the right wires
together.
