background image

www.dfi .com

45

Chapter 3 BIOS Setup

Chapter 3

Save & Exit

Reset the system after 
saving the changes. 

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.

Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.

Save Changes and Reset

Discard Changes and Reset

Restore Defaults

Boot Override

Launch EFI Shell from fi lesystem device

Chipset

Advanced

Main

Boot

Security

Save & Exit



 Select Screen



   Select Item

Enter: Select
+/-:   Change Opt.
F1:   General Help
F2: Previous 

Values

F3: Optimized 

Defaults

ESC:  Exit

Save Changes and Reset

To save the changes, select this field and then press <Enter>. A dialog box will appear. 

Select Yes to reset the system after saving all changes made.

Discard Changes and Reset

To discard the changes, select this field and then press <Enter>. A dialog box will appear. 

Select Yes to reset the system setup without saving any changes.

Restore Defaults

To restore and load the optimized default values, select this field and then press <Enter>. 

A dialog box will appear. Select Yes to restore the default values of all the setup options.

Launch EFI Shell from filesystem device

Attempts to Launch EFI Shell application (Shellx64.efi) from one of the available filesystem 

devices.

Updating the BIOS

To update the BIOS, you will need the new BIOS file and a flash utility, AFUDOS.

EXE. Please contact technical support or your sales representative for the files.

To execute the utility, type:

A:> AFUDOS BIOS_File_Name /b /p /n 

then press <Enter>.

C:\AFU\AFUDOS>afudos fi lename /B /P /N 

+--------------------------------------------------------------------------------------------------------+

AMI Firmware Update Utility(APTIO) v2.25

Copyright (C)2008 American Megatrends Inc. All Rights Reserved.

+--------------------------------------------------------------------------------------------------------+

|
|

|
|

 Reading 

fi le ..............................

 Erasing 

fl ash .............................

 Writing 

fl ash .............................

 Verifying 

fl ash ..........................

  Erasing BootBlock ....................
  Writing BootBlock ....................
  Verifying BootBlock .................

C:\AFU\AFUDOS>

done
done
done
done
done
done
done

Содержание SB102-D




























































Отзывы: