DFI P5BV3+/e, Руководство пользователя

Страница: 45 / 59

3
Award BIOS Setup Utility
45
3.1.10 User Password
If you want another user to have access only to your system but not
to setup, set a user’s password with the “System” option selected in
the BIOS Features Setup. If you want a user to enter a password when
trying to access setup, set a user’s password with the “Setup” option
selected in the BIOS Features Setup. Using user’s password to enter
Setup allows a user to access only the “User Password” option that
appears on the main screen. Access to all other options is denied. To
set, confirm, verify, disable or delete a user’s password, follow the
procedures described in the section “Supervisor Password”. If you
forget your password, refer to the procedure described in the same
section.
3.1.11 IDE HDD Auto Detection
Use this option to detect the parameters for the hard disk drives
installed in your system. These parameters will then be automatically
entered into the "Standard CMOS Setup". The IDE HDD Auto
Detection screen displays the following categories of information: Size,
Cylinders, Heads, Precomp, LandZone, Sectors and Mode.
For hard drives larger than 528MB, you would typically select the LBA
type. Certain operating systems require that you select Normal or
Large. Please check your operating system’s manual or Help desk on
which one to select.
ROM PCI/ISA BIOS
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
HARD DISKS TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE
Primary Master:
Select Primary Master Option (N=Skip): N
OPTIONS SIZE CYLS HEAD RECOMP LANDZ SECTOR MODE
2 (Y) 3501 848 128 0 7236 63 LBA
1 3501 7237 15 65535 7236 63 Normal
3 3499 904 120 65535 7236 63 Large
Note: Some OS (like SCO-UNIX) must be “NORMAL” for installation
ESC: Skip
The settings on the screen are for reference only. Your version may not be
identical to this one.