48
3
BIOS Setup
3.1.1.5 Video
This field selects the type of video adapter used for the primary
system monitor. Although secondary monitors are supported, you
do not have to select the type. The default setting is EGA/VGA.
EGA/VGA
Enhanced Graphics Adapter/Video Graphics Array.
For EGA, VGA, SVGA and PGA monitor adapters.
CGA 40
Color Graphics Adapter. Power up in 40-column
mode.
CGA 80
Color Graphics Adapter. Power up in 80-column
mode.
Mono
Monochrome adapter. Includes high resolution
monochrome adapters.
3.1.1.6 Halt On
This field determines whether the system will stop if an error is
detected during power up. The default setting is All Errors.
No Errors
The system boot will not stop for any errors de-
tected.
All Errors
The system boot will stop whenever the BIOS de-
tects a non-fatal error.
All, But Keyboard
The system boot will not stop for a key-
board error; it will stop for all other errors.
All, But Diskette
The system boot will not stop for a disk er-
ror; it will stop for all other errors.
All, But Disk/Key
The system boot will not stop for a disk or
keyboard error; it will stop for all other er-
rors.
3.1.1.7 Base Memory
Displays the amount of base (or conventional) memory installed
in the system. The value of the base memory is typically 512K for
systems with 512K memory installed on the motherboard or
640K for systems with 640K or more memory installed on the
motherboard.
p4x533-ale 80310409 3.pmd
2/18/2004, 8:13 AM
48
www.DataSheet4U.com
