3
70
Award BIOS Setup Utility
Soft-Off by PWRBTN
This field allows you to select the method of powering off your
system.
Delay 4 Sec
Regardless of whether the Power Management field
is enabled or disabled, if the power button is
pushed and released in less than 4 sec, the system
enters the Suspend mode. The purpose of this func-
tion is to prevent the system from powering off in
case you accidentally “hit” or pushed the power but-
ton. Push and release again in less than 4 sec to
restore. Pushing the power button for more than 4
seconds will power off the system.
Instant-Off
Pressing and then releasing the power button at
once will immediately power off your system.
PWR Lost Resume State
Keep Off
When power returns after an AC power failure, the
system’s power is off. You must press the Power but-
ton to power-on the system.
Turn On
When power returns after an AC power failure, the
system will automatically power-on.
Last State
When power returns after an AC power failure, the
system will return to the state where you left off be-
fore power failure occurs. If the system’s power is off
when AC power failure occurs, it will remain off when
power returns. If the system’s power is on when AC
power failure occurs, the system will power-on when
power returns.
