DFI LanParty LT P35, Руководство пользователя

Страница: 111 / 167

111
3
BIOS Setup
CPU Feature
Move the cursor to this field and press <Enter>, the following
screen will appear:
The settings on the screen are for reference only. Your version may not be
identical to this one.
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Phoenix - AwardBIOS CMOS Setup Utility
CPU Feature
Item Help
Menu Level
XX
Use <
↑
> or <
↓
> to
select a device, then
press <+> to move it up,
or <-> to move it down
the list. Press <ESC> to
exit this menu.
↑↓
: Move PU/PD/+/-: Change Priority F10: Save ESC: Exit
Thermal Management Control
Thermal Management
TM2 Bus Ratio
TM2 Bus VID
PPM Mode
Limit CPUID MaxVal
C1E Function
Execute Disable Bit
Virtualization Technology
Core Multi-Processing Enabled
Thermal Monitor 1
0
0.8375
Native Mode
Disabled
Auto
Enabled
Enabled
Enabled
Thermal Management Control
This field is used to enable or disable thermal management.
Thermal Management
Select a “thermal monitor” in this field to enable the CPU’s
speedstep function. Restart the system then go to the operating
system’s “Control Panel”. Double-click “Power Options”. The “Power
Options Properties” dialog box will appear. In the “Power Schemes”
menu, select “Portable/Laptop”. Speedstep reduces the CPU’s fre-
quency and voltage in accordance to its load.
Thermal Monitor 1 On die throtting.
Thermal Monitor 2 Ratio and VID transition.
TM2 Bus Ratio
This field is used to select the bus ratio of the throttled performance
state that will be initiated when the on-die sensor turns from cool to
hot.