DFI LANPARTY DK X58-T3EH6, Руководство пользователя

Страница: 163 / 166

A
1 6 3
Debug LED POST and Troubleshooting
POST (hex)
C1
C3/C5
CF E0
Debug Code Action
00
-> C0
-> Stopped at
C1
(00
-> C0
-> C1
->
Reset
-> Looping)
C0
-> C1
-> Stopped at
C3/C5
(C0
-> C1
-> C3
->
Reset
-> Looping)
Shutdown
-> Stopped at
CF
(Shutdown
-> CF
-> Reset)
C0
-> C1
-> Stopped at
E0
BIOS Program Definition
Detecting memory
.
Detecting DRAM size and type. ECC auto-detection of L2 cache. Expanding compressed BIOS code to the DRAM. Resume on S1/S3 failed. E0-EF Definition: Initializing PCIE device check code.
Possible Cause
1
.
Incompatible memory modules.
2
.
Overclocking issue (tight DRAM timing).
3
.
One of the memory modules is defective.
1
.
Tight DRAM timing (system is unstable).
2
.
Insufficient DRAM voltage.
3
.
Overclocking issue.
1
.
Insufficient DRAM voltage.
2
.
Incompatible memory modules.
3
.
Overclocking issue (tight DRAM timing).
4
.
BIOS issue.
1
.
Mixed-up BIOS data.
2
.
Incompatible PCI devices.
Solution
1
.
Remove and reinstall the memory modules.
2
.
Clear the CMOS then load the default speed.
3
.
T
ry installing a single module only
.
1
.
Clear the CMOS then load the default speed.
2
.
Increase the DRAM’s voltage.
3
.
Remove and reinstall the memory modules.
1
.
Increase the DRAM’s voltage.
2
.
Remove and reinstall the memory modules.
3
.
Load the default DRAM speed.
4
.
Upgrade to the latest BIOS.
1
.
Clear the CMOS data.
2
.
Remove and reinstall the PCI device.