68
3
BIOS Setup
Parallel Port Mode
The options are
SPP, EPP, ECP and ECP+EPP.
These apply to a
standard specification and will depend on the type and speed of
your device. Refer to your peripheral’s manual for the best op-
tion.
SPP
Allows normal speed operation but in one direction only.
ECP (Extended Capabilities Port)
Allows parallel port to operate in bidirectional mode and at a
speed faster than the normal mode’s data transfer rate.
EPP (Enhanced Parallel Port)
Allows bidirectional parallel por t operation at maximum
speed.
ECP Mode Use DMA
This is used to select the DMA channel of the parallel port.
3.1.4.4 Init Display First
This field is used to select whether to initialize the AGP or PCI
first when the system boots.
AGP
When the system boots, it will first initialize the
AGP.
PCI Slot
When the system boots, it will first initialize PCI.
