www.d
fi
.com
15
Chapter 4 Jumper Settings
Chapter 4
Chapter 4 - Jumper Settings
Clear CMOS Data
If you encounter the followings,
a) CMOS data becomes corrupted.
b) You forgot the supervisor or user password.
you can reconfigure the system with the default values stored in the ROM BIOS.
To load the default values stored in the ROM BIOS, please follow the steps below.
1. Power-off the system and unplug the power cord.
2. Set JP7 pins 2 and 3 to On. Wait for a few seconds and set JP7 back to its default setting,
pins 1 and 2 On.
3. Now plug the power cord and power-on the system.
JP7
2-3 On:
Clear CMOS Data
1-2 On: Normal (default)
3
1 2
3
1 2
PS/2 Keyboard/Mouse Power Select
JP6
2-3 On: +5V_standby
1-2 On: +5V (default)
1
3
2
1
3
2
JP6 is used to select the power of the PS/2 keyboard/mouse port. Sel5V_standby
will allow you to use the PS/2 keyboard or PS/2 mouse to wake up the system.
Important:
The +5VSB power source of your power supply must support
≥
720mA.
