2
Connecting the Cable to the Terminal Block
The system's power connector is a two-pole terminal block. Please insert the corresponding
end ("+" or "-") of a power adaptor to the respective pole of the terminal block.
1. Insert the cable end of the power adaptor to the terminal block. To firmly fix the cable
into the terminal block, use a screwdriver to clamp down the wires to the screw that is in
the terminal block.
Terminal block
Wire
Power adapter cable
2. Plug the terminal block into the DC-in connector and then tighten the screws to secure the
terminal block in place.
DC-in
connector
Screws
White Wire
Black Wire
+ -
