13
User's Manual |
KS-KH
Chapter 3
Notch
Retention Notch
Key
Socket Top View
DDR4 SO-DIMM
Retention Clip
45°
Step 1
Step 2
Step 3
Installing a SODIMM
The system supports two DDR4 SODIMM socket. The SODIMM sockets are located on the sys-
tem board.
Grasp the module by its edges and align the memory’s notch with the socket’s notch. Then in-
sert the memory into the socket at an angle and push it down until you feel a click.
Notes:
1. The system supports dual-channel configuration. To enable dual-channel, popu-
late both SODIMM sockets.
2. The SKUs with ECC-supported CPUs and Intel
®
CM238 Chipset support ECC
memory.
3. If installing only one memory module, please install it on the memory socket
labeled DIMM 1 (the one closer to the center of the board).
4. The SODIMM sockets can only accept DDR4 memory modules. Please do not
install other types of memory modules.
SODIMM sockets
