www.dfi.com
Chapter 2
- Hardware Installation
KD171
22
Expansion Slots
PCI Express x16 Slot
Install a PCI Express x16 graphics card that complies to the PCI Express specifications into the
PCI Express x16 slot. To install a graphics card into the x16 slot, align the graphics card to the
socket and perpendicularly to the board, be cautious in aligning the locations of notch and key,
and then press the card down firmly until it is completely seated. The retaining clip of the slot
will close up automatically to hold the graphics card in place.
BIOS Setting
Configure PCIe root ports in the Advanced menu (“PCI Express Configuration” submenu) of the
BIOS. Refer to chapter 3 for more information.
PCIE1 (PCIe x16)
►
Internal I/O Connectors
The lithium ion battery addendum supplies power to the real-time clock and CMOS memory as
an auxiliary source of power when the main power is shut off.
To install or remove the battery into or from the vertical slot, please bend the protective cap
away before inserting or removing the battery.
Safety Measures
• There exists explosion hazard if the battery is incorrectly installed.
• Replace only with the same or equivalent type recommended by the manufacturer.
• Dispose of used batteries according to local ordinances.
Battery
Battery
►
Internal I/O Connectors
