DFI Infinity NF650I Ultra, Руководство пользователя

Страница: 95 / 155

9 5
3
BIOS Setup
Power On By Button
To use the power button to power on the system, set this field to
Enabled.
KB Power On Password
Move the cursor to this field and press <Enter>. Enter your password.
You can enter up to 5 characters. Type in exactly the same password to
confirm, then press <Enter>.
The power button will not function once a keyboard password has
been set in this field. You must type the correct password to power-on
the system. If you forgot the password, power-off the system and remove
the battery. Wait for a few seconds and install it back before powering-
on the system.
Hot Key Power On
This field is used to select a function key that you would like to use to
power-on the system.
Onboard FDC Controller
Enabled Enables the onboard floppy disk controller.
Disabled Disables the onboard floppy disk controller.
Onboard Serial Port
Auto The system will automatically select an I/O
address for the onboard serial port.
3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3 Allows you to manu-
ally select an I/O address for the onboard se-
rial port.
Disabled Disables the onboard serial port.
Onboard IRDA Select
Auto The system will automatically select an I/O ad-
dress for the onboard IrDA.
3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3 Allows you to manu-
ally select an I/O address for the onboard
IrDA.
Disabled Disables the onboard IrDA.