manualshive.com logo in svg

DFI G5G100-P, Руководство пользователя, Страница: 106 / 113

Поделиться
Скачать
DFI G5G100-P Скачать руководство пользователя страница 106

106

4

Supported Software

Intel USB 2.0 Drivers

The Intel chipset does not support USB 2.0 drivers for Windows

®

98 SE and Windows

® 

ME.

Windows

®

 XP

If your Windows

®

 XP CD already includes Service Pack 1, the USB

2.0 driver will automatically install when you install the operating
system. If the CD does not include Service Pack 1, it is available for
download at Microsoft’s Windows Update website.

Windows

®

 2000

If your Windows

®

 2000 CD already includes Service Pack 4, the

USB 2.0 driver will automatically install when you install the operating
system. If the CD does not include Service Pack 4, it is available for
download at Microsoft’s Windows Update website.

Installation Notes

1. "Autorun" ONLY suppor ts the Windows

®

 98 SE, Windows

® 

ME,

Windows

®

 2000, Windows NT

®

 4.0 and Windows

®

 XP

operating systems. If after inserting the CD, "Autorun" did not
automatically start (which is, the Main Board Utility CD screen
did not appear), please go directly to the root directory of the
CD and double-click "Setup".

2. All steps or procedures to install software drivers are subject to

change without notice as the softwares are occassionally updated.
Please contact technical support or your sales representative for
the latest version of the drivers or software applications.

Содержание G5G100-P


















































































































Отзывы:

Нет отзывов