15
Jumpers JP6-JP8, JP19, and JP20
Cache Memory
Jumpers JP6-JP8, JP19, and JP20 should be set according to the
cache size as shown below.
1-2 On
1-2 On
1-2 On
1-2 On
1-2 On
2-3 On
1-2 On
2-3 On
JP7
JP8
JP19
JP20
JP6
1-2 On
2-3 On
256KB with 32-byte
line size*
512KB with 32-byte
line size
* Default setting
1
2
3
1
2
3
1-2: On
2-3: On
Installing the Cache Module
Locate the 160-pin cache module slot on the system board. Position the
cache module above the slot. Make sure pin 1 of the cache module is
aligned with pin 1 of the slot. Carefully slide the module into the slot.
Press firmly on the top of it to seat it properly. The cache module
mode should be set according to the CPU type shown below.
Jumper JP1
JP1
Intel, AMD
Cyrix
1-2 On
2-3 On
Note that this Jumper is on the cache module and is not on the
motherboard.
