DFI G486VPA, Руководство пользователя

Страница: 104 / 132

PCI/ISA System Board
v
Appendix B: System Error Report
When the BIOS encounters an error that requires the
user to correct something, either a beep code will sound
or a message will be displayed in a box in the middle of
the screen and a message PRESS F1 TO CONTINUE,
CTRL-ALT-ESC or DEL TO ENTER SETUP will be
shown in the information box at the bottom.
POST Beep
Currently, there is only one beep code in BIOS. This
code indicates that a video error has occurred and the
BIOS cannot initialize the video screen to display any
additional information. This beep code consists of a
single long beep followed by two short beeps.
Error Messages
One or more of the following messages may be dis-
played if the BIOS detects an error during the POST.
CMOS BATTERY HAS FAILED
CMOS battery is no longer functional. It should be
replaced. The replacement battery is a 3V Lithium
CR2032. Replacing the battery will clear the CMOS.
Refer to the Jumper JP2 section of this manual, page
2-11, to reset the CMOS. Location of the battery and
replacement procedure are given on pages 5-1 and 5-2
of the manual.
B-1
u
Appendix B