2
Installing a 2.5" SATA Drive
1.
The SATA drive bay can be easily accessed witout opening the system.
However, the system does not support hot-swapping hard drives; turn off the
system first. Locate the drive bay on the front panel and open it by releasing
the handle.
2. Slide the HDD into the drive bay. Note that the HDD should be positioned
vertically with the SATA power connector on top of the data connector to
correctly engage with the system's SATA connectors. Then close the drive bay
and lock the handle.
SATA power/data cable
Notes:
1.
The slot is desgined to exactly fit a 2.5" SATA drive with 7mm thickness; it
cannot fit SATA drives with other sizes.
2.
Do not force to close the drive bay if the HDD is not correctly inserted.
SATA drive bay
SATA 2 SATA 1
SATA power
Connecotr
Drive bay handle
