DFI EC531-SD Скачать руководство пользователя страница 1

1

EC531-SD/EC532-SD Installation Guide

Package Contents

www.dfi.com

• 

1  EC531-SD/EC532-SD system unit

• 

Mounting screws for SATA drive

• 

Mounting screws for Mini PCIe module

Panel

DC-in

DVI-I

(DVI-D signal)

HDMI

(2)

USB 3.0

LAN 1 LAN 2

USB 3.0

SATA 2 SATA 1

VGA

COM 1
COM 2

COM 3

Remote

Power on/off

Line-out

Microphone

Expansion slots

DIO COM4 COM5 COM6

Status LED (Orange)  

HDD LED (Red)

Power Button

(1)

with LED (Green)

DFI reserves the right to change the specifications at any time prior to the product's release. For the latest revision and details of the 

installation process, please refer to the user's manual.

Notes:

1. Please gently press the power button to avoid possible damages.
2. The HDMI is a DP/HDMI combo port but can only transmit HDMI signals (unless wired as a DP port by 

request). Please plug in an HDMI cable with the right orientation and alignment to avoid damage to the 
connector. You should feel resistance (due to a pin on the right) if the cable is not inserted correctly.

    For detailed instructions, please see a video at https://youtu.be/SUj07rfN5l8.

Align this edge with the 

left side of the connector

Angled-corner

(up)

Angled-corner

Aligning side

(left)

pin

Содержание EC531-SD










Отзывы: