DFI CT930-B, Руководство пользователя

Страница: 13 / 122

1
Introduction
13
This function allows you to use the PS/2 key-
board or PS/2 mouse to power-on the sys-
tem.
Important:
The 5V_standby power source of your power supply must sup-
port
≥
720mA.
This function allows you to use a USB key-
board or USB mouse to wake up a system
from the S 1 state.
Important:
If you are using the Wake-On-USB Keyboard/Mouse function for
2 USB ports, the 5V_standby power source of your power sup-
ply must support
≥
1.5A. For 3 or more USB ports, the
5V_standby power source of your power supply must support
≥
2A.
The RTC installed on the system board allows your
system to automatically power-on on the set date
and time.
The system board is designed to meet the ACPI
(Advanced Configuration and Power Interface) speci-
fication. ACPI has energy saving features that enables PCs to imple-
ment Power Management and Plug-and-Play with operating systems
that suppor t OS Direct Power Management. Currently, only Win-
dows
® ® ® ® ®
2000/XP supports the ACPI function. ACPI when enabled in
the Power Management Setup will allow you to use the S 1 function.
Important:
The 5V_standby power source of your power supply must sup-
port
≥
720mA.
When power returns after an AC power fail-
ure, you may choose to either power-on the
system manually or let the system power-on
automatically.
wake-on-USB
wake-on-PS/2
rtc timer
ACPI STR
Power failure
recovery