Introduction
1
12
wake-on-ring
Serial ATA is a storage interface that is compliant
with SATA 1.0 specification. With speed of up to
3Gbps (CT132-BR) or 1.5Gbps (CT132-B), it improves hard drive
performance faster than the standard parallel ATA whose data trans-
fer rate is 100MB/s. The Intel ICH7R chip on CT132-BR allows
configuring RAID on Serial ATA drives. It supports RAID 0, RAID 1,
RAID 0+1 and RAID 5.
The Realtek PCI Express Gigabit LAN controller
supports up to 1Gbps data transmission.
The system board is equipped with an IrDA connec-
tor for wireless connectivity between your computer
and peripheral devices. The IRDA (Infrared Data Association) specifi-
cation supports data transfers of 115K baud at a distance of 1
meter.
The system board supports USB 2.0 and USB 1.1
por ts. USB 1.1 supports 12Mb/second bandwidth
while USB 2.0 supports 480Mb/second bandwidth providing a
marked improvement in device transfer speeds between your com-
puter and a wide range of simultaneously accessible external Plug
and Play peripherals.
This feature allows the system that is in the
Suspend mode or Soft Power Off mode to
wake-up/power-on to respond to calls coming from an external mo-
dem or respond to calls from a modem PCI card that uses the PCI
PME (Power Management Event) signal to remotely wake up the
PC.
Important:
The 5V_standby power source of your power supply must sup-
port
≥
720mA.
USB
SERIAL ATA
irda
gigabit lan
