41
User's Manual | CS631
Chapter 3
BIOS SETTINGS
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Chipset
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Chipset
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
X
Chipset
X
Chipset
Enable Root Port
Enable or disable the root port.
Max Link Speed
Configure PCIE1/PCIE2 port’s Max Speed: Auto, Gen1, Gen2 or Gen3.
LAN1(I219)
Enable or disable onboard NIC.
Wake on LAN Enable
Enable or disable integrated LAN to wake the system.
State After G3
This field is to specify what state the system should be in when power is re-applied after a
power failure.
S0 State
The system automatically powers on after power failure.
S5 State
The system enter soft-off state after power failure. Power-on signal input is
required to power up the system.
PEG Port Configuration
PCH-IO Configuration
Enable or Disable the Root
Port
PCI Express Configuration
settings
PEG Port Configuration
PCIE1
Enable Root Port
Max Link Speed
PCIE3
Enable Root Port
Max Link Speed
PCH-IO Configuration
►
PCI Express Configuration
►
SATA And RST Configuration
►
HD Audio Configuration
LAN1(I219)
Wake on LAN Enable
State After G3
Not Present
[Enabled]
[Auto]
Not Present
[Enabled]
[Auto]
[Enabled]
[Enabled]
[S0 State]
Note:
The sub-menus are detailed in following sections.
